SCHEDA TECNICA/ TECHNICAL DATASHEET
VALVOLE DI SEQUENZA AD ANNULLAMENTO PRESSIONE
PRIMARIA
SEQUENCE VALVES
Valvola utilizzata principalmente per far funzionare
in sequenza due cilindri: al raggiungimento di un
determinato valore di taratura, la valvola si apre e
va ad alimentare un secondo attuatore. La valvola
di ritegno permette il libero passaggio del usso nel-
la direzione opposta. E’ insensibile alle contropres-
sioni, pertanto consente di utilizzare la pressione
impostata dall’impianto per azionare entrambi gli
attuatori.
SCHEMA IDRAULICO SCHEMA DI MONTAGGIO
PERDITE DI CARICO PRESSIONE/PORTATA
HYDRAULIC DIAGRAM APPLICATION SCHEME
PRESSURE DROPS CURVE PRESSURE/FLOW
Sequence valve is used to feed 2 cylinders in sequence:
it provides ow to the secondary circuit when a primary
circuit function has been completed reaching the pressure
setting. Return ow is free. Being insensitive to back
pressures, it allows to use the circuit pressure to control
both the actuators.
USE AND OPERATION:
Per l’impiego con due attuatori seguire le indicazio-
ni di montaggio illustrate nello schema.
Per altri usi montare la valvola tenendo in consi-
derazione che, al raggiungimento del valore di
pressione impostato, il usso va da V in C, mentre
da C a V è libero.
• Molle per diversi campi di taratura (vedi tabelle)
• Pressioni di taratura speciche (CODICE/T 000
specicando il valore di taratura)
For use with 2 actuators, follow the mounting instructions
indicated in the scheme. For different uses, mount the valve
keeping into consideration that, when the valve reaches
the setting pressure, the ow goes from V towards C, whilst
ow is free from C to V.
A RICHIESTA
• different setting range (see the table)
• other setting available (CODE/T000 please specify the desired
setting)
TIPO / TYPE
VSQAPP
Corpo: acciaio zincato
Componenti interni: acciaio temprato termicamente
e retticato
Guarnizioni: BUNA N standard
Tenuta: a cono guidato. Tralamento trascurabile
Body: zinc-plated steel
Internal parts: hardened and ground steel
Seals: BUNA N standard
Poppet type: minor leakage
Temperatura olio: 50°C - Viscosità olio: 30 cSt
Oil temperature: 50° C - Oil viscosity: 30 cSt
6.2
MATERIALS AND FEATURES:
APPLICATIONS:
MONTAGGIO:
ON REQUEST
MATERIALI E CARATTERISTICHE:
IMPIEGO:
Δ
Δ
Δ
Δ
P (BAR)
P (BAR)
P (BAR)
P (BAR)
FLOW - Q (l/min) FLOW - Q (l/min) FLOW - Q (l/min) FLOW - Q (l/min)
VSQAPP 3/8”
VSQAPP 1/2”
VSQAPP 3/4”